Custom slide

Design your own tool


What is Argolight’s elementary point ?

Actually our technology induces rings, not points.

The elementary structure, i.e. the fluorescent element at the root of any pattern, is an empty cylinder whose dimensions can be adjusted: the length (FWHM) can be varied from 0.5 to 10 µm, the diameter (FWHM) from 0.5 to 2 µm, and the wall thickness (FWHM) from 120 to 550 nm. The section of this cylinder is a ring with the corresponding dimensions.

From this elementary structure, any 3D fluorescent pattern can be painted, from sub-micrometer to centimeter scales. Additionally linear, circular or more complex trajectories at different depths can be painted, with different fluorescent intensity levels.

 Where are these fluorescents patterns ? 

Our fluorescent patterns are induced under the surface of a home-designed glass.

As we wanted to simulate the presence of a coverslip (to mimic a classic sample slide), our technology is designed to induce our patterns under the surface at 170 µm. The refractive index is specific : 1.52

These parameters allow optimal working conditions to check the performances of lens objectives as they are designed for focusing through a coverslip.

For a specific demand we are able to induce pattern without to much aberrations :

  • HM like (0,6µm*0,6µm*0,6µm) : from 120µm to 220µm under the surface
  • LM like (2µm*2µm*8µm) : from 50µm to 500µm under th surface

What kind of fluorescent pattern can you induce ?

Additionally linear, circular or more complex trajectories at different depths can be painted, with different fluorescent intensity levels.

The patterns are excitable from 325 to 650 nm and the emission is a continuum ranging from slightly above the excitation wavelength up to 800 nm. The lifetime of the fluorescence is within the nanosecond range.

How do you define prices ?

Prices are defined based on the number of points and on the surface of the pattern.

  • Largest dimensions : 1000 µm x 1000 µm
  • Surface of the pattern n x larger = n x n more time to produce
  • Closest distance between two lines: 30 nm

What property do you want to control ?